Shelly (Allterco Robotics LTD)
Shelly 3EM
SKU: ALRLSHELLY3EM
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.What is Z-Wave?
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Product Description
Smart 3-Phase Energy Meter with contactor control Wi-Fi:
- Three independent measurement channels up to 120 A each
- Contactor control (any size load it is rated for)
- Reports power, voltage, current, overall energy, and power factor
- 365 days of internal memory in case Wi-Fi is not available
- Included 3x Current Transformers 120 A
- Easy control through the Shelly app, various protocols, and platforms, as well as voice assistants
Smart 3-Phase Energy Meter with Contactor Control.
Many appliances, homes, and buildings use more energy than they need, leading to energy waste and higher spending. Shelly 3EM is a smart 3-phase professional energy meter that will help monitor electricity usage in real-time and get notified in case an appliance or system consumes power above a pre-set threshold. Additionally, it allows for contactor control Smart energy metering will help you identify and eliminate any redundant energy consumption.
Functionalities:
- Wi-Fi Operated: Connect Shelly 3EM to your Wi-Fi network. No HUB required!
- Power Monitoring: Shelly 3EM monitors monophase electrical systems with up to 3 points simultaneously.
- Contactor control: Shelly 3EM has an integrated relay with a rated current of 10A per output for contactor control.
- 365 days of data storage: The measurements from Shelly 3EM are stored in a free cloud for 365 days.
- Custom schedules: Set custom schedules based on a daily agenda or working hours.
- Smart scenes: Set custom scenes by combining Shelly 3EM with your other Shelly devices.
Full compatibility.
Shelly devices are compatible with Alexa, Google Home, Android and iOS. Together with the voice assistant, you can command Shelly devices using just your voice!
Shelly Smart Control.
Shelly Smart Control is here! One app to control your spaces, energy consumption, and expenses.
Use cases:
Preventative monitoring.
When an electrical appliance is damaged, it doesn"t simply stop working. Usually, it increases the amount of energy used in an attempt to compensate for its operational capacity. Since there is no visible difference in its performance, it might take months before you can identify a problem, leading to inefficiency and wasted energy. Shelly 3EM power monitoring will immediately read the increase in energy consumption and will notify you, saving you additional expenses on repairs or replacement of equipment.
Solar panels monitoring and control.
Keep track of how much energy your solar panels and wind turbines are generating and save effortlessly. Shelly 3EM provides real-time information about the efficiency of the solar and wind energy system, as well as historical data on how much energy has been generated and consumed. This helps you control the energy flow, getting the most out of your solar panels and wind turbines. To take it a step further, connect a contactor to Shelly 3EM, so you can switch off automatically non-essential devices in your home, in order to save energy.
Smart and efficient car charger.
Shelly 3EM is developed to monitor one, two, or three phases and allows you to monitor the status and history and the current and past electrical power consumption of each separate channel for the day, week, month, or year. Shelly 3EM exports all data in CSV format in 10-minute intervals, making data analysis and cutting back costs easy. That way, you can monitor the exact energy your electric car consumes and calculate what part of your electricity bill it forms.
2-way energy consumption monitoring.
Monitor your home, office, or factory, and avoid additional expenses or drops in voltage that can damage your appliances and devices. Shelly 3EM can calculate 2-way consumption: produced and used energy for each of the three phases. The device can be configured to measure three separate circuits of a mono-phase electrical system and control a contactor. View the quality of your electricity network regarding active power, reactive power, voltage, and power factor.
Features:
- Smart 3-Phase Energy Meter with contactor control Wi-Fi
- Power Supply AC: 110-230V ±10%, 50/60Hz
- Power Supply DC: No
- Contactor Control: Yes – Shelly 3EM has an integrated relay with a rated current of 10A per output for contactor control
- Roller Shutter Mode: No
- Device Temperature Protection: No
- Overload Protection: No
- Power Measurement: Yes
- In Box: 3x 120A current transformers that are factory calibrated with the meter for accuracy
- Channels: 3 Channels
- Operational Temperature: 0 to + 40 °C
- Device Power Consumption: < 1 W
- Intelligent On/Off: Yes
- Local and Remote Control: Yes
- Sunrise/Sunset: Yes
- Weekly Schedule: Yes
- UL Listed option: No
- Wireless/WiFi Protocol: 802.11 b/g/n
- Radiofrequency: 2400 – 2500 MHz
- Range: Up to 50 m outdoors and up to 30 m indoors (depending on the building materials)
Prepare for Installation / Reset
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
Safety Warning for Mains Powered Devices
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
Inclusion/Exclusion
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Quick trouble shooting
Here are a few hints for network installation if things dont work as expected.
- Make sure a device is in factory reset state before including. In doubt exclude before include.
- If inclusion still fails, check if both devices use the same frequency.
- Remove all dead devices from associations. Otherwise you will see severe delays.
- Never use sleeping battery devices without a central controller.
- Dont poll FLIRS devices.
- Make sure to have enough mains powered device to benefit from the meshing
Technical Data
| Dimensions | 0.0220000x0.0830000x0.0590000 mm |
| Weight | 282 gr |
| EAN | 3800235262214 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |
Explanation of Z-Wave specific terms
- Controller — is a Z-Wave device with capabilities to manage the network. Controllers are typically Gateways,Remote Controls or battery operated wall controllers.
- Slave — is a Z-Wave device without capabilities to manage the network. Slaves can be sensors, actuators and even remote controls.
- Primary Controller — is the central organizer of the network. It must be a controller. There can be only one primary controller in a Z-Wave network.
- Inclusion — is the process of adding new Z-Wave devices into a network.
- Exclusion — is the process of removing Z-Wave devices from the network.
- Association — is a control relationship between a controlling device and a controlled device.
- Wakeup Notification — is a special wireless message issued by a Z-Wave device to announces that is able to communicate.
- Node Information Frame — is a special wireless message issued by a Z-Wave device to announce its capabilities and functions.