Shelly (Allterco Robotics LTD)

Shelly Dimmer 0-10V

SKU: ALRLDIMMER-0-10V


Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

0-10V DC smart dimming controller.
Designed to manage 0-10V dimming drivers, Shelly Plus 0-10V Dimmer offers precise dimming with remote control. It is retrofit and can be used with any regular switch you have at home.

No hub required! Easy control through the Shelly Smart Control app, most platforms and protocols, as well as voice assistants.
Use it with Alexa, Home Assistant, or your preferred automation platform
Supports signal control for multiple types of drivers (lights, motors, valves, etc; depending on the driver)
One/dual button dimming mode (use with physical switches)
Wi-Fi Range Extender & BLE Gateway
Extremely fast processor for immediate reaction - ESP32
Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates

WHY SHELLY PLUS 0-10V DIMMER?
Use it with your existing switches! No need to invest in new, specialized dimmer switches that clash with your home"s aesthetic. Now, even buttons that weren"t originally designed for dimming can work with Shelly Plus 0-10V Dimmer. You can use your favorite style and brands of switches and seamlessly integrate dimming capabilities into your current setup.

Wi-Fi operated.
Connect Shelly Plus 0-10V Dimmer to your Wi-Fi network. No HUB required!

Bluetooth.
Quick inclusion via Bluetooth or use it as a Bluetooth gateway.

Smart schedules.
Set custom schedules based on your daily agenda, or follow the sunrise/sunset and control your lighting accordingly.

Flexible input control.
Use it with your existing switches, no matter if they"re single or dual button.

Smart scenes.
Set custom scenes by combining Shelly Plus 0–10V Dimmer with your other Shelly devices.

Scripting.
Shelly Plus 0-10V Dimmer fully supports scripting, allowing you local control and custom functionalities.

Use cases.
Brightness that suits your activities.
Depending on your activities and the time of day, different types of light and luminosity are suitable. With Shelly Plus 0-10V Dimmer, you can align the minimum and maximum brightness levels with your driver"s range for exact precision when adjusting your lights. Whether you want to set the ambiance for a relaxing evening or ensure the best brightness for focused tasks, it grants you fine-tuned control to match every moment. No need to navigate through the app - just use your voice!

Personalized light schedules.
Shelly Plus 0-10V Dimmer can effortlessly blend with your daily routine. Consider bedtime: Many kids prefer to fall asleep with the lights turned on. You can set schedules that, over an hour, gently dim the room before switching the lights off completely. That way, the little one will be comfortably asleep, and no energy will go to waste!

Set the mood instantly.
Shelly Plus 0-10V Dimmer doesn"t stop at schedules- it embraces moments too. With its pre-set lighting scenes, a simple voice command can transform your room. Feel like watching a movie? Just tell Alexa, "Movie night," and your space instantly adapts, casting the perfect ambiance for your cinematic experience.

Illuminate & fade.
Give yourself time to exit a room without bumping into things. Once Shelly BLU Motion doesn"t detect movement, Shelly Plus 0-10V Dimmer doesn"t turn off the lights abruptly. Instead, it can gently fade them over 20 seconds, ensuring you"re never left in the dark. Customize the duration to fit your pace and always ensure a safe exit.

"Night mode" for soft night light.
Walking to the bathroom at night could no longer irritate your sleepy eyes. Shelly Plus 0-10V Dimmer has a "Night mode" functionality, setting the lights" brightness at a low level during the night hours. Now when the lights are turned on manually, through voice, or a motion sensor, they will always be dimmed and soft.

Shelly Smart Control.
one app to control your spaces, energy consumption, and expenses. 

Full compatibility.
Shelly devices are compatible with Alexa, Google Home, Android and iOS. Together with the voice assistant, you can command Shelly devices using just your voice! 

Features:

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

  1. Make sure a device is in factory reset state before including. In doubt exclude before include.
  2. If inclusion still fails, check if both devices use the same frequency.
  3. Remove all dead devices from associations. Otherwise you will see severe delays.
  4. Never use sleeping battery devices without a central controller.
  5. Dont poll FLIRS devices.
  6. Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions 0.0420000x0.0370000x0.0160000 mm
Weight 18 gr
EAN 3800235265703
Frequency XXfrequency
Maximum transmission power XXantenna

Explanation of Z-Wave specific terms